Anti-lock Braking System (ABS) is an essential component of modern vehicles safety system, it prevents a vehicle’s wheels from locking up during emergency braking, hence maintaining the vehicle’s steering control. The anti-lock braking system cannot get work without the Anti-lock Braking System pump. However, the anti-lock braking system pump can wear out or malfunction over time, if not timely set for refurbishment then it can compromise the functionality of the anti-lock braking system. Therefore, this article will focus on the anti-lock braking system pump refurbishment process and benefits.
What is an ABS Pump?
The ABS pump is a component of the ABS system which metes out brake pressure to prevent tyre lockup. It operates in tandem with the ABS control module, the wheel speed sensors, relays and the hydraulic brake circuit to ensure the brakes are applied accordingly. When the brakes are suddenly applied very hard, the ABS pump rapidly pauses and restarts the brake pressure to prevent the vehicle from skidding. This lets you still steer and stay under control, even when you’re stopping rapidly in an emergency.
Why Refurbish an ABS Pump?
ABS pumps are a mechanical part meaning they require replacement periodically due to their natural wear and tear. They are affected by exposure to high and low temperatures, moisture and frequent use. Nowadays, ABS pump repair and ABS replacement are very popular due to improvements in technology.
When your ABS pump fails, the entire braking system is compromised as it reduces the braking distance and also causes instability while braking. The fact is, if a driver doesn’t do anything, ABS won’t do anything. However, it’s better to be safe than sorry either way. Have your braking system regularly checked by a licensed mechanic.
Replacing an ABS pump with ABS pump refurbishment is more cost effective as it gives your car the proper system to keep you and your vehicle safe.
The ABS Pump Refurbishment Process
Diagnosis and Assessment: Before the ABS pump refurbishment can begin, technicians must first diagnose and assess the ABS pump and determine what needs to be changed and rectified. The use of tools and equipment are necessary to make a proper diagnosis.
Take apart: Upon the problems discovery, the ABS pump has been disassembled. It starts with the take part of the pump housing and reaches to the inside part. The inside part consist of the valves, oil seals and motor.
Cleaning
Clean and Inspection
Each part of the ABS pump is thoroughly cleaned in order to remove oil, dirt, foreign matter and corrosion. After cleaning, the parts are inspected for signs of wear or damage.
1) Replacement of Wear Parts: The worked parts that have deteriorated or rusted are removed and replaced by new or reconditioned installed items. In the case of a launderer, it could be a change of plunger seals, air-inlet valves, or the electric motor.
Reassembly and the Testing: Before the customer receives the refurbished part, the ABS pump is disassembled and the defective parts are replaced. After a process of reassembly, the refurbished pump is subject to intensive testing to guarantee that it performs as required and with as good as a new part.
Quality Control: At the last stage, the repaired ABS pump is being tested so that all the quality controls are satisfied and the pump is indeed reliable.
Benefits of ABS Pump Refurbishment
Cost-effective: Buying a refurbished ABS pump is often cheaper than a new one. Vehicle owners can get their braking system working again by restoring the old parts without spending a considerable amount of money on new pumps.
Lifespan: Replacing the rusty ABS unit with the refurbished ABS pump will give the brakes a new lease on life, potentially adding thousands of miles.
Safe operation: The ABS pump should be in tip-top shape or the vehicle may be unsafe. In cases of emergency braking, wheel lockup can be prevented and steering control maintained if the ABS is functioning properly.
Environmental benefits: ABS refurbishment is an ecological approach which eliminates the need to produce new components and reduces waste.
Conclusion
ABS pump refurbishment is an important process that helps to maintain the safety and function of a vehicles braking system . On completion of a ABS pump refurbishment a vehicles performance will be fully restored and enable drivers to maintain safe and effective braking as well as reducing stopping distances which will, in turn, improve overall vehicle control . ABS pump refurbishment helps to keep vehicles safe and reduces the potential risk of road traffic accidents when braking systems are not functioning correctly.
Frequent servicing and comprehensive maintenance as well as a timely ABS pump refurbishment helps to secure the safety of the car and its passengers and provides a more cost-efficient and also more environmentally-friendly approach to car servicing. Whether you consider yourself a car geek or simply a concerned driver, understanding the essence of the ABS pump refurbishment adds value to your safety and overall driving experience.
